ACDelco Performance AGM Battery – Group 48
Our ACDelco Performance AGM Battery in Group 48 configuration brings proven absorbed glass mat technology to vehicles requiring premium starting power and exceptional vibration resistance. Engineered for modern cars and trucks with advanced electrical systems, this maintenance-free battery delivers consistent performance across extreme temperatures.
The sealed valve-regulated design eliminates the need for adding water while preventing acid leaks and corrosion. With enhanced cycling capability and faster recharge times than conventional flooded batteries, our Group 48 AGM ensures your vehicle starts reliably season after season, even with high accessory loads draining power when the engine is off.
- Absorbed glass mat (AGM) technology for superior vibration resistance and durability
- Group 48 (H6) dimensions: 10.94″ L × 6.89″ W × 7.50″ H fits BMW, Mercedes-Benz, Audi, and select import vehicles
- Valve-regulated sealed construction – completely maintenance-free, no water additions required
- 760 cold cranking amps (CCA) deliver reliable starts in temperatures as low as 0°F
- 92 amp-hour (Ah) reserve capacity supports high electrical loads and accessory demands
AGM Technology & Construction Details
The ACDelco Performance AGM battery utilizes absorbed glass mat technology, where the electrolyte is suspended within highly porous microfiber glass mat separators rather than free-flowing liquid. This construction method provides three critical advantages: enhanced vibration resistance that protects internal components during rough driving conditions, faster ion transfer for improved cranking performance in cold weather, and complete spill-proof operation even if the case is damaged.
Our calcium-alloy grid design maximizes electrical conductivity while minimizing self-discharge during storage and vehicle downtime. The valve-regulated recombinant system captures hydrogen and oxygen gases produced during charging, recombining them into water internally—eliminating maintenance requirements and extending battery life beyond conventional flooded designs.
Group 48 Fitment & Compatibility
Group 48 batteries (also designated H6 or L3 in some applications) measure 10.94 inches long, 6.89 inches wide, and 7.50 inches tall—dimensions standardized by the Battery Council International for specific vehicle platforms. This size is predominantly specified for European and Asian import vehicles including BMW 3-series and 5-series, Mercedes-Benz C-class and E-class, Audi A4 and A6, Volkswagen Passat, and select Lexus and Toyota models with higher electrical demands.
Before installation, verify your current battery’s group size by checking the label on top of the battery case or consulting your vehicle owner’s manual. Terminal configuration on our Group 48 features top-post terminals with reverse polarity (negative terminal on driver side)—confirm this matches your vehicle’s cable layout. Proper fitment ensures the hold-down bracket secures the battery without excessive force while allowing adequate ventilation around the case.
Installation & Safety Guidelines
Always disconnect the negative (ground) cable first when removing your old battery, then disconnect the positive cable—reverse this sequence when installing the new ACDelco Performance AGM battery to prevent electrical shorts. Clean battery tray and hold-down components with a wire brush and baking soda solution to remove corrosion before placing the new battery, ensuring solid metal-to-metal contact for proper grounding.
Tighten terminal connections to manufacturer torque specifications (typically 60-120 inch-pounds for top-post terminals) using a calibrated torque wrench—over-tightening can crack the terminal posts on AGM batteries. Apply a thin coating of dielectric grease to terminal connections after tightening to prevent corrosion without interfering with electrical conductivity.
Power Solutions for Every Vehicle
What people are saying
Group 48 AGM Battery Questions
Group 48 (also called H6 or L3) batteries are primarily specified for European and Asian vehicles including BMW 3-series, 5-series, and X3; Mercedes-Benz C-class, E-class, and GLK; Audi A4, A6, and Q5; Volkswagen Passat and CC; plus select Lexus IS and Toyota models with high electrical demands.
Always verify your current battery’s group size marking or consult your owner’s manual before purchasing, as some model years within these vehicle lines may use different battery sizes. The physical dimensions must match your battery tray and hold-down bracket configuration for safe installation.
Yes, you can upgrade from a flooded battery to this ACDelco Performance AGM battery in Group 48 size as long as the physical dimensions match and your charging system voltage stays within 13.8-14.8 volts. AGM batteries offer superior performance for vehicles with stop-start systems, regenerative braking, or high accessory loads.
The sealed AGM construction provides additional benefits including vibration resistance, faster recharge capability, and elimination of acid leaks. You do not need to modify your vehicle’s charging system when upgrading from flooded to AGM in most applications, though vehicles equipped with battery management systems may require registration of the new battery type.
Service life for this acdelco performance agm battery review group 48 typically ranges from 4 to 7 years depending on climate conditions, driving patterns, and electrical load management. Vehicles driven regularly for 20+ minutes per trip in moderate climates achieve the longest lifespan, while short-trip urban driving in extreme heat or cold reduces longevity.
Maintaining proper charge levels extends battery life significantly—using a smart charger during extended storage periods prevents deep discharge damage that shortens capacity. AGM batteries generally outlast conventional flooded batteries by 1-2 years in demanding applications with frequent cycling or partial state-of-charge operation.
This Group 48 AGM battery provides 760 cold cranking amps, which exceeds the requirements for most four-cylinder and six-cylinder engines in the 2.0L to 3.5L range. CCA requirements depend on engine displacement and compression ratio—larger engines and diesel applications need higher CCA ratings for reliable cold-weather starting.
Check your owner’s manual for minimum CCA specifications, then select a battery that meets or exceeds that value. The 760 CCA rating in this ACDelco AGM ensures strong cranking performance down to 0°F for typical Group 48 applications including BMW inline-six engines, Mercedes-Benz V6 configurations, and Audi turbocharged four-cylinders.
AGM batteries require chargers that limit voltage to 14.4-14.7 volts during bulk charging and 13.2-13.8 volts for float maintenance—most modern smart chargers include an AGM-specific charging profile that provides these parameters. Using conventional chargers designed for flooded batteries may overcharge AGM cells, causing grid corrosion and premature capacity loss.
Your vehicle’s alternator typically charges AGM batteries correctly without modification, as voltage regulators in most cars maintain 13.8-14.4 volts during normal operation. For bench charging or maintenance charging during storage, invest in a quality microprocessor-controlled charger with AGM mode to maximize your battery’s service life and performance.
This ACDelco Performance AGM battery features valve-regulated sealed construction that allows safe installation in multiple positions including upright, on-side orientations, and angled mounting—but never completely inverted (upside-down). The absorbed glass mat design immobilizes the electrolyte within the separator material, preventing spills even if the case is cracked.
Some European vehicles mount batteries in trunk compartments, under seats, or beneath cargo floors where sealed AGM construction prevents acid vapor emissions that would corrode interior components. Always secure batteries with appropriate hold-down brackets regardless of mounting position to prevent movement during vehicle operation, which can damage internal connections and reduce battery life.
ACDelco Performance AGM batteries include comprehensive warranty protection with a free-replacement period covering manufacturing defects and premature capacity loss under normal automotive use. The warranty extends beyond the free-replacement period with prorated coverage based on purchase date and remaining capacity measured at time of claim.
Warranty terms require proper installation following vehicle manufacturer guidelines, appropriate battery size selection for your application, and functioning charging system maintaining correct voltage output. Save your purchase receipt and register your battery to ensure smooth warranty processing if issues arise during the coverage period.