ACDelco Deep Cycle Battery – Extended Discharge
Our ACDelco Deep Cycle Battery is engineered for applications that demand consistent, long-duration power delivery. Unlike standard automotive batteries designed for short bursts of energy, this deep cycle battery withstands repeated discharge and recharge cycles without degradation.
Built with heavy-duty lead-calcium alloy grids and absorbed glass mat (AGM) technology, the battery provides reliable performance for marine electronics, trolling motors, RV house systems, and renewable energy storage. The maintenance-free design eliminates the need for water additions, while spill-proof construction ensures safe operation in any mounting position.
Whether you’re powering a weekend fishing trip or running off-grid appliances, this ACDelco deep cycle battery delivers the extended runtime and cycling durability your equipment requires.
- AGM (Absorbed Glass Mat) construction for superior vibration resistance and leak-proof operation
- Lead-calcium alloy grids minimize self-discharge and extend shelf life
- Deep discharge recovery capability withstands 80% depth-of-discharge cycling
- Maintenance-free sealed design requires no water additions throughout service life
- Spill-proof construction allows safe mounting in any orientation
AGM Construction & Grid Technology
The ACDelco deep cycle battery uses absorbed glass mat separators that suspend electrolyte between the positive and negative plates. This design eliminates free liquid acid, preventing spills and allowing installation at any angle without compromising performance.
Our lead-calcium alloy grid construction provides several advantages over traditional antimony-lead grids. Calcium reduces self-discharge rates by up to 50%, meaning the battery retains charge longer during storage. The alloy also increases resistance to corrosion, extending the usable life of the plates even under harsh deep-cycling conditions.
Deep Discharge Cycling Performance
Standard automotive batteries fail rapidly when discharged below 50% of capacity. Our ACDelco deep cycle battery is specifically engineered to handle repeated discharges to 20% state-of-charge without permanent capacity loss.
The thicker active material paste on the plates withstands the physical expansion and contraction that occurs during deep discharge cycles. Under typical marine or RV use patterns—full discharge followed by overnight recharging—you can expect 300-500 cycles at 80% depth-of-discharge before capacity drops below 80% of rated performance.
Marine & RV Applications
This deep cycle battery serves as the primary power source for trolling motors, fish finders, navigation electronics, and onboard accessories on fishing boats and sailboats. The sealed AGM design prevents corrosive acid fumes that damage marine electronics and upholstery.
In recreational vehicles, the battery powers 12V lighting, water pumps, furnace blowers, and entertainment systems when disconnected from shore power or generator. Pairing multiple units in parallel increases available amp-hours for extended boondocking trips.
More Marine Power Solutions
What people are saying
Common Questions About ACDelco Deep Cycle Batteries
Our deep cycle battery models are available in multiple capacity ratings ranging from 75Ah to 125Ah at the 20-hour discharge rate. The specific amp-hour rating depends on the physical size group you select (Group 24, 27, or 31).
Larger case sizes accommodate thicker plates and more active material, increasing total capacity. For example, a Group 27 model typically provides 90-100Ah, while a Group 31 delivers 110-125Ah. Choose capacity based on your daily power consumption needs and available installation space.
While the ACDelco deep cycle battery can provide starting current, it is optimized for sustained discharge rather than high-amperage cranking. For marine applications requiring both engine starting and accessory power, we recommend either installing a dedicated starting battery alongside the deep cycle battery, or selecting our dual-purpose model that balances cranking performance with cycling capability.
Using a true deep cycle battery for frequent engine starting reduces its lifespan because the thin plates designed for deep cycling cannot withstand the repeated high-current demands of starter motors as effectively as dedicated starting batteries.
Recharge time depends on the charger output current and how deeply the battery was discharged. With a quality 10-amp smart charger, expect approximately 8-10 hours to fully recharge from 50% state-of-charge, or 14-18 hours from complete discharge.
Higher-output chargers (20-30 amps) can reduce bulk charging time to 4-6 hours, though the final absorption stage still requires 2-3 hours regardless of charger amperage. AGM batteries charge more efficiently than flooded types, accepting higher currents without excessive heat buildup when using an appropriate AGM charging profile.
ACDelco provides a limited warranty covering defects in materials and workmanship. Warranty duration varies by model and ranges from 12 to 36 months from the date of purchase.
Warranty coverage requires proper charging methods, appropriate application use, and normal operating conditions. Batteries damaged by overcharging, freezing while discharged, or physical abuse are not covered. Register your battery purchase within 30 days at our website to activate full warranty protection and simplify any future claims process.
Yes, the sealed AGM construction allows safe mounting in any orientation without risk of acid leakage. The absorbed glass mat material immobilizes the electrolyte, preventing spills even if the case is punctured.
However, we recommend mounting with terminals accessible from above whenever possible for easiest cable connection and maintenance. Ensure adequate clearance around the battery for ventilation regardless of mounting angle. Avoid mounting upside-down in enclosed spaces where the relief valves would face downward, potentially trapping any gases released during charging.
Store the ACDelco deep cycle battery in a cool, dry location at 50-70% state-of-charge. Fully charged AGM batteries can tolerate freezing temperatures without damage, while discharged batteries may freeze and suffer permanent damage below 32°F.
Recharge the battery every 2-3 months during storage to counteract self-discharge, or connect a quality maintenance charger that automatically monitors and maintains optimal charge levels. Remove the battery from the vehicle or boat during storage to prevent parasitic loads from slowly draining capacity. Batteries stored at moderate temperatures (40-70°F) experience slower degradation than those stored in hot environments above 90°F.
Under typical use patterns with 50% depth-of-discharge cycles followed by complete recharging, expect 500-800 cycles before capacity drops to 80% of rated performance. Shallower discharge cycles (30-40% depth) can extend cycle life to over 1,000 cycles.
Conversely, regularly discharging to 80-90% depth reduces cycle life to 200-400 cycles. Temperature also affects longevity—batteries cycled in moderate temperatures (60-80°F) last significantly longer than those subjected to extreme heat or cold. Proper charging practices using AGM-compatible chargers maximize service life regardless of cycling depth.